The Short Roman Shade Mounting Board is a straight 1x2" milled to assure alignment of pulleys and cordlocks. I trim it to your needed length. Maximum length is 34 7/8 inches.

Mounting boards are used to attach the shade panel to your window frame or, in the case of an outside mount, the wall or moulding above your window using L-brackets.

Choose your length in inches and fractions of an inch.

Example #1: If you need your mounting board trimmed to 33 1/2" you'll choose '33' from 'Whole Inches' and '1/2' from 'Fraction Inch'.

Example #2: If you need your mounting board trimmed to 33" even, you'll choose '33' from 'Whole Inches' and 'NONE' from 'Fraction Inch'.

The Long Roman Shade Mounting Board is a straight 1x2" milled to assure alignment of pulleys and cordlocks. I trim it to your needed length. Maximum length is 57 7/8 inches.

Mounting boards are used to attach the shade panel to your window frame or, in the case of an outside mount, the wall or moulding above your window using L-brackets.

Choose your length in inches and fractions of an inch.

The Short Roman Shade Rib is a crystal clear, 1/4" diameter rib which casts virtually no 'shadow' through your shade. For use with Roman shade tube tape. I trim them to your needed length. Maximum length is 34 7/8 inches.

Choose your length in inches and fractions of an inch.

Example #1: If you need your ribs trimmed to 33 1/2" you'll choose '33' from 'Whole Inches' and '1/2' from 'Fraction Inch'.

Example #2: If you need your ribs trimmed to 33" even, you'll choose '33' from 'Whole Inches' and 'NONE' from 'Fraction Inch'.

The Long Roman Shade Rib is a crystal clear, 1/4" diameter rib which casts virtually no 'shadow' through your shade. For use with Roman shade tube tape. I trim them to your needed length. Maximum length is 57 7/8 inches.

Choose your length in inches and fractions of an inch.

Example #1: If you need your ribs trimmed to 45 1/2" you'll choose '45' from 'Whole Inches' and '1/2' from 'Fraction Inch'.

Example #2: If you need your ribs trimmed to 45" even, you'll choose '45' from 'Whole Inches' and 'NONE' from 'Fraction Inch'.

Call for pricing if 58 inches or over is needed.

• Size: 1 1/4 inches high
  
• Color: White
• Spacing: Cord slots for stringing shade cords are approximately 3/8 inch apart
• Use: The tube ('rib pocket') part of the tape holds the ribs inside while the cord slots are spaced for easily lining up the shade cords with your mounting board lifting hardware.
• Note: Please call the 800 number if you require transparent tube tape.
  

Pricing: Price is per inch. Whole inches only.

• Size: 1 inch (25mm)
• Color: White tape with white 3/8 inch interior diameter plastic rings
• Spacing: Rings are 5 inches apart
• Use: Can be used for Roman shades without ribs or for Balloon, London or Relaxed Roman shades
• Rings are U.V. protected

• Size: 3/4 inch (19mm)
• Color: Transparent with fabric loops
• Spacing: Loops are 5 7/8 inches apart
• Use: Can be used for Roman shades without ribs or for Balloon, London or Relaxed Roman shades when you don't want to see the silhouette of the tape through the shade

• Size: 1 inch (25mm)
• Color: White tape with white 3/8 inch inside diameter plastic rings
• Spacing: Rings are 10 inches apart
• Use: Gathers (shirrs) fabric up to 3 to 1 fullness; used for Austrian shades
• Rings are U.V. protected

• Size: 5/8 inch (12mm)
• Color: Transparent with fabric loops
• Spacing: Loops are 5 7/8 inches apart
• Use: Gathers (shirrs) fabric up to 3 to 1 fullness; used for Austrian shades when you don't want to see the silhouette of the tape through the shade

• Size: 1 inch
• Color: White
• Use: Can be used to make Hobbled Roman Shades, or Balloon, London or Relaxed Roman where spacing of the rings is determined by you, by sewing them on where you want them. Roman Shade Sew-On Rings are sold separately.

• Size: 1 inch (25 mm)
• Color: Transparent
• Use: Gathers (shirrs) fabric up to 3 to 1 fullness
• Optimal results if each side of tape is sewn on in the same direction