Mock Roman Shade (Valance)

[Visitor]

I am interested in making Mock Roman shades (valances) for two different sized windows. Is there a formula for determining the size and number of folds in relation to the size of the window? I am interested in keeping the existing blinds on these windows, so the valances will be mounted outside of the windows, but will still need to project out a small amount to allow the blinds to clear. Any suggesstions in constructing these shades to include yardage requirements will be greatly appreciated.
Thank-you

[Debby Bowman]

I would think the Mock Roman Shade (valances) would be constructed the same way as a working roman shade with the difference being that you wouldn't be opening and closing it.

The best way to determine the size and number of folds along with your fabric requirements and all other supplies would be to create yourself a pattern on this website using the measurements for each of your windows. Each pattern is created unique to the dimensions and selections you choose.
_________________
Thanks,

Debby Bowman
Owner
Shadescapes LLC
800-939-2843
www.make-roman-shades.com

[Visitor]

Well I was searching your quest regarding it and found the below artciles useful
Step 1
Measure the width of the window. Select a wood batten board this same measurement. Apply the hook side of stick-on hook-and-loop tape to the front of the batten. Hang the batten board above the window with the hook-and-loop tape facing outward.

Step 2
Measure from the top edge of the batten to the length you want the valance to hang. Double this measurement. For example, a valance to hang 20-inches long will require 40-inches of fabric. Cut the fabric to this measurement.

Step 3
Add 1-inch to the width of the batten. This is your valance finished width measurement. Cut the fabric to this measurement.

Step 4
Hem all four edges of the fabric with a 1/4-inch hem. Lay the fabric right side down on a flat surface. Mark the fabric with six horizontal lines. Using a fabric pencil, mark the lines every 6 inches beginning 2 inches from the bottom. For example, at the bottom edge measure up 2 inches and draw a line across the width of the valance. From that line, measure up 6 inches and draw another line. Continue until you have six lines drawn.

Step 5
Fold the fabric to give the valance the look of roman shades. Pick up the bottom line and place it 1 inch below the next line. Allow the fabric to fold in between the lines. Pin the line in place. Pick up the second line and place it 1 inch below the next line. Pin in place. Continue until all the lines have been shifted. This will create the look of roman shades in the up position.

Step 6
Secure the folds in place by hand stitching the width of the folded edges that lay on the back of the valance. Then secure the side edges with a blind stitch from the back.

Step 7
Machine stitch the loop side of the hook-and-loop tape to the back of the valance at the top. Hang the valance by joining the loop tape on the valance to the batten's hook tape.
Source - Ehow











______________

[url=http://www.google.com]Search Guru[/url]
[url=http://www.blinds-sales.co.uk/venetian-blinds/]Venetian blinds[/url]

[Visitor]

Well I was searching your quest regarding it and found the below artciles useful
Step 1
Measure the width of the window. Select a wood batten board this same measurement. Apply the hook side of stick-on hook-and-loop tape to the front of the batten. Hang the batten board above the window with the hook-and-loop tape facing outward.

Step 2
Measure from the top edge of the batten to the length you want the valance to hang. Double this measurement. For example, a valance to hang 20-inches long will require 40-inches of fabric. Cut the fabric to this measurement.

Step 3
Add 1-inch to the width of the batten. This is your valance finished width measurement. Cut the fabric to this measurement.

Step 4
Hem all four edges of the fabric with a 1/4-inch hem. Lay the fabric right side down on a flat surface. Mark the fabric with six horizontal lines. Using a fabric pencil, mark the lines every 6 inches beginning 2 inches from the bottom. For example, at the bottom edge measure up 2 inches and draw a line across the width of the valance. From that line, measure up 6 inches and draw another line. Continue until you have six lines drawn.

Step 5
Fold the fabric to give the valance the look of roman shades. Pick up the bottom line and place it 1 inch below the next line. Allow the fabric to fold in between the lines. Pin the line in place. Pick up the second line and place it 1 inch below the next line. Pin in place. Continue until all the lines have been shifted. This will create the look of roman shades in the up position.

Step 6
Secure the folds in place by hand stitching the width of the folded edges that lay on the back of the valance. Then secure the side edges with a blind stitch from the back.

Step 7
Machine stitch the loop side of the hook-and-loop tape to the back of the valance at the top. Hang the valance by joining the loop tape on the valance to the batten's hook tape.
Source - Ehow











______________

Search Guru
Venetian blinds