The Roman Shade Pulley assures a smoothly operating shade under light or heavy fabric loads. It features a no-rust metallic base and a UV resistant plastic wheel and wheel housing.

Each pulley includes (2) #6 x 1/2" self-drilling screws to attach it to your shade mounting board.

Click image for a larger picture.

The Roman Shade 3-Cord Cord Lock is suitable for a shade with up to 3 cords. It features a no-rust metallic base and slots to separate three cords encased in a UV resistant housing.

Each cord lock includes (2) #6 x 1/2" self-drilling screws to attach to the cord lock to your shade mounting board.

  Installing & Threading Your Cord Lock

Each cord lock includes (2) #6 x 1/2" self-drilling screws to attach to the cord lock to your shade mounting board..

  Installing & Threading Your Cord Lock

The Short Roman Shade Mounting Board is a straight 1x2" milled to assure alignment of pulleys and cordlocks. I trim it to your needed length. Maximum length is 34 7/8 inches.

Mounting boards are used to attach the shade panel to your window frame or, in the case of an outside mount, the wall or moulding above your window using L-brackets.

Choose your length in inches and fractions of an inch.

Example #1: If you need your mounting board trimmed to 33 1/2" you'll choose '33' from 'Whole Inches' and '1/2' from 'Fraction Inch'.

Example #2: If you need your mounting board trimmed to 33" even, you'll choose '33' from 'Whole Inches' and 'NONE' from 'Fraction Inch'.

The Long Roman Shade Mounting Board is a straight 1x2" milled to assure alignment of pulleys and cordlocks. I trim it to your needed length. Maximum length is 57 7/8 inches.

Mounting boards are used to attach the shade panel to your window frame or, in the case of an outside mount, the wall or moulding above your window using L-brackets.

Choose your length in inches and fractions of an inch.

The Short Roman Shade Rib is an off-white 3/16" diameter plastic rib used by inserting it in the rib pocket built into my Roman shade tube tape. I trim the ribs to your needed length. Maximum length is 34 7/8 inches.

Choose your length in inches and fractions of an inch.

Example #1: If you need your ribs trimmed to 33 1/2" you'll choose '33' from 'Whole Inches' and '1/2' from 'Fraction Inch'.

Example #2: If you need your ribs trimmed to 33" even, you'll choose '33' from 'Whole Inches' and 'NONE' from 'Fraction Inch'.

The Long Roman Shade Rib is an off-white 3/16" diameter plastic rib used by inserting it in the rib pocket built into my Roman shade tube tape. I trim them to your needed length. Maximum length is 57 7/8 inches.

Choose your length in inches and fractions of an inch.

Example #1: If you need your ribs trimmed to 45 1/2" you'll choose '45' from 'Whole Inches' and '1/2' from 'Fraction Inch'.

Example #2: If you need your ribs trimmed to 45" even, you'll choose '45' from 'Whole Inches' and 'NONE' from 'Fraction Inch'.

Call for pricing if 58 inches or over is needed.

• Size: 1 1/4 inches high
  
• Color: White
• Spacing: Cord slots for stringing shade cords are approximately 3/8 inch apart
• Use: The tube ('rib pocket') part of the tape holds the ribs inside while the cord slots are spaced for easily lining up the shade cords with your mounting board lifting hardware.
• Note: Please call the 800 number if you require transparent tube tape.
  

Pricing: Price is per inch. Whole inches only.

No picture available. 

The Bright Brass plastic cord weight is shaped like the White Plastic Cord Weight (on right in picture) but with a shiny brass-like  finish. It is 1-inch in diameter and 1 5/8 inches high. Weight: negligible.

• White
• 54 inch Wide - 50% Cotton, 50% Polyester
• Looks and feels like 100% cotton sateen
• Muted luster finish
• Light filtering
• Wrinkle resistant
• Stain resistant
• Water repellant
• Dry cleanable or washable

• White
• 54 inch Wide - 70% Polyester, 30% Cotton
• Room darkening
• Insulated to improve heating and air conditioning efficiency
• Offers noise and temperature control
• Dry cleanable

Click image for a larger picture.

Zinc L-Bracket measuring 1.5 x 2 inches created specifically for use on outside mounted shades.

Details:

• Price includes a single (1) L-Bracket
  
• Price includes (2) #8 x 3/4" self-drilling screws to attach the bracket to your mounting board.
• Price includes (1) hollow wall fasterner for mounting bracket into drywall.
• Price includes (1) #8 x 2" self-drilling screw for mounting bracket into solid material.

• A mounting board to the top-inside of a window frame if you're doing an inside mounted shade.
• An L-Bracket to a solid wall material if doing an outside mounted shade.

The number needed for inside mounting depends upon your shade's width. My patterns help you determine the number your need for your shade's width.